Version 1046 vs 1058
Version 1046 vs 1058
Content Changes
Content Changes
This is a testing checklist which must be complete prior to marking a final release is ready. It should be deprecated with {T56}.
---
Installer tests - 22.04 (Jammy Jellyfish) + SRU Calamares 3.2.61
===================
QA testing proposed - https://bugs.launchpad.net/ubuntu/+source/calamares/+bug/1992507
Please use
- the current jammy daily,
- add jammy-proposed, `sudo apt update`,
- upgrade calamares & any package(s) required
- check the calamares is 3.2.61-0ubuntu0.1 and NOT 3.2.60-0ubuntu0.1
- then proceed normally
Release date: -
Final Freeze: -
Beta release: -
RC reached at: -
#IMPORTANT: All of these tests must be re-done if an upload of Calamares or settings is done after a pre-release freeze.
- calamares: 3.2.61-0ubuntu0.1 (from -proposed!)
- calamares-settings-lubuntu 1:22.04.4.2
- calamares-settings-ubuntu-common 1:22.04.4.2
- lubuntu-default-settings: 22.04.2
- casper 1.470.1
NOTE: Currently updated for the jammy media [20220919]
http://iso.qa.ubuntu.com/qatracker/milestones/433/builds
/* #Upstream (Ubuntu) https://discourse.ubuntu.com/t/kinetic-kudu-release-schedule/27263
#Upstream Release Status tracking found at -
#Lubuntu issue tracker https://discourse.lubuntu.me/t/lubuntu-kinetic-kudu-22-10-issue-tracker/3589/2
*/
Full disk install tests
-----------------------
| Type | Encryption | Firmware | Internet | Swap (Y/N) | Completed Date | Tester | ISO | pc.detail | paste.for.tracker
| ----- | ----- | ----- | ---- | ---- | ---- | ---- | ----
| Full disk install | no | BIOS | yes | y | | | | | testcase: full disk, no-encryption, BIOS, internet, swap
| Full disk install | yes | BIOS | yes | n | | | | | testcase: full disk, encryption, BIOS, internet, no-swap
| Full disk install | no | BIOS | no | y | | | | | testcase: full disk, no-encryption, BIOS, no-internet, swap
| Full disk install | yes | BIOS | no | n | | | | | testcase: full disk, encryption, BIOS, no-internet, no-swap
| Full disk install | no | EFI | yes | y | | | | | testcase: full disk, no-encryption, EFI, internet, swap
| Full disk install | yes | EFI | yes | y | | | | | testcase: full disk, encryption, EFI, internet, swap
| Full disk install | no | EFI | no | n | | | | | testcase: full disk, no-, EFI, no-internet, no-swap
| Full disk install | yes | EFI | no | n | | || | testcase: full disk, encryption, EFI, no-internet, no-swap
| Full disk install | no | EFI + secure boot | yes | y | | | | | testcase: full disk, no-encryption, secure-EFI, internet, swap
| Full disk install | yes | EFI + secure boot | yes | n | | | | | testcase: full disk, encryption, secure-EFI, internet, no-swap
| Full disk install | no | EFI + secure boot | no | y | | | | | testcase: full disk, no-encryption, secure-EFI, no-internet, swap
| Full disk install | yes | EFI + secure boot | no | n | | | | | testcase: full disk, encryption, secure-EFI, no-internet, no-swap
Please try and ensure one of SWAP (Y) & NO-SWAP (N) exist for each test type (ie. BIOS, uEFI or Secure-uEFI) for releases of hirsute or later.
Other install types
-------------------
| Type | Completed Date | Tester | ISO | pc.detail | paste.for.tracker
| ----- | ----- | ----- | ----
| Install alongside | | | | | testcase: install alongside
| Replace partition | | | | | testcase: replace partition
| Install using existing partition | | | | | testcase: install using existing partition
| Custom partitioning with separate /home | | | | | testcase: custom partitioning with separate /home
| Custom partitioning on btrfs | | | | | testcase: custom partitioning with BTRFS
| Custom partitioning on xfs | | | | | testcase: custom partitioning with XFS
| Install using another language | | | |
| Auto-login after install | | | |
---
The install using another language, and/or auto-login can be combined with another install, ie. a single QA-test can be used to refresh the details of up to two lines on this checklist (eg. auto-install or install with another language)
#Additional testcases
#====================
#
#| Test Information | Completed Date | Tester | pc.detail
#| ----- | ----- | ----- |
#| GUI upgrade¹ from prior release | 20221014 |@Leok | lenV14ILL
#| TUI upgrade² from prior release | 20221014 |@Leok | lenV14ILL
#| GUI upgrade¹ from jammy with backports enabled | 20221014 |@Leok | dell_opt_7060
#| TUI upgrade² from jammy with backports enabled |20221014 |@Leok | dell_opt_7060
#| GUI upgrade¹ from LTS to next LTS release | na |
#| TUI upgrade² from LTS to next LTS release | na |
#| minimal install³ | not applicable
If required on Lubuntu 22.04 LTS with backports; refer https://lubuntu.me/jammy-backports-22-04-1/ for details on adding backports
¹`do-release-upgrade -d -m desktop -f DistUpgradeViewKDE`
²`do-release-upgrade -d`
³[Currently not implemented](https://phab.lubuntu.me/T58)
* The purpose of the "Optional box" field is to allow re-tests to be done on a different box to prior time (if possible)
* na is short for not-applicable
* focal or 20.04 doesn't have swapfile option so please ignore that field
To help understanding some of these testcases, the following link maybe helpful - https://discourse.lubuntu.me/t/testing-checklist-understanding-the-testcases/2743
This is a testing checklist which must be complete prior to marking a final release is ready. It should be deprecated with {T56}.
---
Installer tests - 22.04 (Jammy Jellyfish) + SRU Calamares 3.2.61
===================
QA testing proposed - https://bugs.launchpad.net/ubuntu/+source/calamares/+bug/1992507
Please use
- the current jammy daily (proposed should be enabled)
- check the calamares is 3.2.61-0ubuntu0.1 and NOT 3.2.60-0ubuntu0.1
If it's not (firstly check your ISO), as you shouldn't need to
- add jammy-proposed, `sudo apt update`,
- upgrade calamares & any package(s) required
- check the calamares is 3.2.61-0ubuntu0.1 and NOT 3.2.60-0ubuntu0.1
- then proceed normally
Release date: -
Final Freeze: -
Beta release: -
RC reached at: -
IMPORTANT: All of these tests must be re-done if an upload of Calamares or settings is done after a pre-release freeze.
- calamares: 3.2.61-0ubuntu0.1 (from -proposed!)
- calamares-settings-lubuntu 1:22.04.4.2
- calamares-settings-ubuntu-common 1:22.04.4.2
- lubuntu-default-settings: 22.04.2
- casper 1.470.1
NOTE: Currently updated for the jammy media [20221025.1]
http://iso.qa.ubuntu.com/qatracker/milestones/429/builds
Full disk install tests
-----------------------
| Type | Encryption | Firmware | Internet | Swap (Y/N) | Completed Date | Tester | ISO | pc.detail | paste.for.tracker
| ----- | ----- | ----- | ---- | ---- | ---- | ---- | ----
| Full disk install | no | BIOS | yes | y | 20221026 | @guiverc | 20221025.1 | hp_dc7700 | testcase: full disk, no-encryption, BIOS, internet, swap
| Full disk install | yes | BIOS | yes | n | 20221026 | @Leok |20221025.1|asrock h410m VM | testcase: full disk, encryption, BIOS, internet, no-swap
| Full disk install | no | BIOS | no | y | 20221027 | @guiverc | 20221026 | hp_dc7700 | testcase: full disk, no-encryption, BIOS, no-internet, swap
| Full disk install | yes | BIOS | no | n |20221027 | @Leok | 20221026|dell_opt_7040 | testcase: full disk, encryption, BIOS, no-internet, no-swap
| Full disk install | no | EFI | yes | y | 20221026 | @guiverc | 20221025.1 | svp11216cgb | testcase: full disk, no-encryption, EFI, internet, swap
| Full disk install | yes | EFI | yes | y |202210026|@Leok |20221025.1 |dell_opt_7040| testcase: full disk, encryption, EFI, internet, swap
| Full disk install | no | EFI | no | n | 20221027 | @guiverc | 20221026 | svp11216cgb | testcase: full disk, no-encryption, EFI, no-internet, no-swap
| Full disk install | yes | EFI | no | n |20221026|@Leok |20221025.1|macmini7.1 | testcase: full disk, encryption, EFI, no-internet, no-swap
| Full disk install | no | EFI + secure boot | yes | y | 20221025 | @leok | 20221025.1 | dell_mt_7060 | testcase: full disk, no-encryption, secure-EFI, internet, swap
| Full disk install | yes | EFI + secure boot | yes | n |20221026 |@Leok |20221025.1 |awow.ny41 | testcase: full disk, encryption, secure-EFI, internet, no-swap
| Full disk install | no | EFI + secure boot | no | y |20221026 | @Leok | 20221025.1 | dell_lat7280| testcase: full disk, no-encryption, secure-EFI, no-internet, swap
| Full disk install | yes | EFI + secure boot | no | n |20221026 |@Leok |20221025.1|lenV14ILL| testcase: full disk, encryption, secure-EFI, no-internet, no-swap
Please try and ensure one of SWAP (Y) & NO-SWAP (N) exist for each test type (ie. BIOS, uEFI or Secure-uEFI) for releases of hirsute or later.
Other install types
-------------------
| Type | Completed Date | Tester | ISO | pc.detail | paste.for.tracker
| ----- | ----- | ----- | ----
| Install alongside | 20221027 | @guiverc | 20221026 | svp11216cgb | testcase: install alongside
| Replace partition | 20221027 | @guiverc | 20221026 | svp11216cgb | testcase: replace partition
| Install using existing partition | 20221027 | @guiverc | 20221026 | dell_opt_755 | testcase: install using existing partition
| Custom partitioning with separate /home |20221026 |@Leok |20221025.1 |dell_opt_7040 | testcase: custom partitioning with separate /home
| Custom partitioning on btrfs |20221026 |@Leok |20221025.1 |aero2.pro | testcase: custom partitioning with BTRFS
| Custom partitioning on xfs |20221026 |@Leok |20221025.1|dell_opt_7060 | testcase: custom partitioning with XFS
| Install using another language |20221026|@Leok |20221025.1|awow.ny41
| Auto-login after install |20221026 |@Leok |20221025.1 |dell_lat_7280
---
The install using another language, and/or auto-login can be combined with another install, ie. a single QA-test can be used to refresh the details of up to two lines on this checklist (eg. auto-install or install with another language)
What follows detail does NOT relate to calamares SRU testing
---
Upstream (Ubuntu) https://discourse.ubuntu.com/t/kinetic-kudu-release-schedule/27263
Upstream Release Status tracking found at -
Lubuntu issue tracker https://discourse.lubuntu.me/t/lubuntu-kinetic-kudu-22-10-issue-tracker/3589/2
Additional testcases
====================
| Test Information | Completed Date | Tester | pc.detail
| ----- | ----- | ----- |
| GUI upgrade¹ from prior release | 20221014 |@Leok | lenV14ILL
| TUI upgrade² from prior release | 20221014 |@Leok | lenV14ILL
| GUI upgrade¹ from jammy with backports enabled | 20221014 |@Leok | dell_opt_7060
| TUI upgrade² from jammy with backports enabled |20221014 |@Leok | dell_opt_7060
| GUI upgrade¹ from LTS to next LTS release | na |
| TUI upgrade² from LTS to next LTS release | na |
| minimal install³ | not applicable
If required on Lubuntu 22.04 LTS with backports; refer https://lubuntu.me/jammy-backports-22-04-1/ for details on adding backports
¹`do-release-upgrade -d -m desktop -f DistUpgradeViewKDE`
²`do-release-upgrade -d`
³[Currently not implemented](https://phab.lubuntu.me/T58)
* The purpose of the "Optional box" field is to allow re-tests to be done on a different box to prior time (if possible)
* na is short for not-applicable
* focal or 20.04 doesn't have swapfile option so please ignore that field
To help understanding some of these testcases, the following link maybe helpful - https://discourse.lubuntu.me/t/testing-checklist-understanding-the-testcases/2743
This is a testing checklist which must be complete prior to marking a final release is ready. It should be deprecated with {T56}.
---
Installer tests - 22.04 (Jammy Jellyfish) + SRU Calamares 3.2.61
===================
QA testing proposed - https://bugs.launchpad.net/ubuntu/+source/calamares/+bug/1992507
Please use
- the current jammy daily, (proposed should be enabled)
- check the calamares is 3.2.61-0ubuntu0.1 and NOT 3.2.60-0ubuntu0.1
If it's not (firstly check your ISO), as you shouldn't need to
- add jammy-proposed, `sudo apt update`,
- upgrade calamares & any package(s) required
- check the calamares is 3.2.61-0ubuntu0.1 and NOT 3.2.60-0ubuntu0.1
- then proceed normally
Release date: -
Final Freeze: -
Beta release: -
RC reached at: -
#IMPORTANT: All of these tests must be re-done if an upload of Calamares or settings is done after a pre-release freeze.
- calamares: 3.2.61-0ubuntu0.1 (from -proposed!)
- calamares-settings-lubuntu 1:22.04.4.2
- calamares-settings-ubuntu-common 1:22.04.4.2
- lubuntu-default-settings: 22.04.2
- casper 1.470.1
NOTE: Currently updated for the jammy media [202209191025.1]
http://iso.qa.ubuntu.com/qatracker/milestones/433/builds
/* #Upstream (Ubuntu) https://discourse.ubuntu.com/t/kinetic-kudu-release-schedule/27263
#Upstream Release Status tracking found at -
#Lubuntu issue tracker https://discourse.lubuntu.me/t/lubuntu-kinetic-kudu-22-10-issue-tracker/3589/2
*/29/builds
Full disk install tests
-----------------------
| Type | Encryption | Firmware | Internet | Swap (Y/N) | Completed Date | Tester | ISO | pc.detail | paste.for.tracker
| ----- | ----- | ----- | ---- | ---- | ---- | ---- | ----
| Full disk install | no | BIOS | yes | y | | | | | 20221026 | @guiverc | 20221025.1 | hp_dc7700 | testcase: full disk, no-encryption, BIOS, internet, swap
| Full disk install | yes | BIOS | yes | n | | | || 20221026 | @Leok |20221025.1|asrock h410m VM | testcase: full disk, encryption, BIOS, internet, no-swap
| Full disk install | no | BIOS | no | y | | | | | 20221027 | @guiverc | 20221026 | hp_dc7700 | testcase: full disk, no-encryption, BIOS, no-internet, swap
| Full disk install | yes | BIOS | no | n | ||20221027 | @Leok | | 20221026|dell_opt_7040 | testcase: full disk, encryption, BIOS, no-internet, no-swap
| Full disk install | no | EFI | yes | y | | | | 20221026 | @guiverc | 20221025.1 | svp11216cgb | testcase: full disk, no-encryption, EFI, internet, swap
| Full disk install | yes | EFI | yes | y | | | | |202210026|@Leok |20221025.1 |dell_opt_7040| testcase: full disk, encryption, EFI, internet, swap
| Full disk install | no | EFI | no | n | | | | | 20221027 | @guiverc | 20221026 | svp11216cgb | testcase: full disk, no-encryption, EFI, no-internet, no-swap
| Full disk install | yes | EFI | no | n | | || |20221026|@Leok |20221025.1|macmini7.1 | testcase: full disk, encryption, EFI, no-internet, no-swap
| Full disk install | no | EFI + secure boot | yes | y | | | | | 20221025 | @leok | 20221025.1 | dell_mt_7060 | testcase: full disk, no-encryption, secure-EFI, internet, swap
| Full disk install | yes | EFI + secure boot | yes | n | | | | |20221026 |@Leok |20221025.1 |awow.ny41 | testcase: full disk, encryption, secure-EFI, internet, no-swap
| Full disk install | no | EFI + secure boot | no | y | | |20221026 | @Leok | | 20221025.1 | dell_lat7280| testcase: full disk, no-encryption, secure-EFI, no-internet, swap
| Full disk install | yes | EFI + secure boot | no | n | | | | |20221026 |@Leok |20221025.1|lenV14ILL| testcase: full disk, encryption, secure-EFI, no-internet, no-swap
Please try and ensure one of SWAP (Y) & NO-SWAP (N) exist for each test type (ie. BIOS, uEFI or Secure-uEFI) for releases of hirsute or later.
Other install types
-------------------
| Type | Completed Date | Tester | ISO | pc.detail | paste.for.tracker
| ----- | ----- | ----- | ----
| Install alongside | | | | 20221027 | @guiverc | 20221026 | svp11216cgb | testcase: install alongside
| Replace partition | | | | 20221027 | @guiverc | 20221026 | svp11216cgb | testcase: replace partition
| Install using existing partition | | | | | 20221027 | @guiverc | 20221026 | dell_opt_755 | testcase: install using existing partition
| Custom partitioning with separate /home | | | | |20221026 |@Leok |20221025.1 |dell_opt_7040 | testcase: custom partitioning with separate /home
| Custom partitioning on btrfs | | | | |20221026 |@Leok |20221025.1 |aero2.pro | testcase: custom partitioning with BTRFS
| Custom partitioning on xfs | | | | |20221026 |@Leok |20221025.1|dell_opt_7060 | testcase: custom partitioning with XFS
| Install using another language | | | ||20221026|@Leok |20221025.1|awow.ny41
| Auto-login after install | | | ||20221026 |@Leok |20221025.1 |dell_lat_7280
---
The install using another language, and/or auto-login can be combined with another install, ie. a single QA-test can be used to refresh the details of up to two lines on this checklist (eg. auto-install or install with another language)
#Additional testcases
#====================What follows detail does NOT relate to calamares SRU testing
---
Upstream (Ubuntu) https://discourse.ubuntu.com/t/kinetic-kudu-release-schedule/27263
#Upstream Release Status tracking found at -
#Lubuntu issue tracker https://discourse.lubuntu.me/t/lubuntu-kinetic-kudu-22-10-issue-tracker/3589/2
Additional testcases
====================
| Test Information | Completed Date | Tester | pc.detail
#| ----- | ----- | ----- |
#| GUI upgrade¹ from prior release | 20221014 |@Leok | lenV14ILL
#| TUI upgrade² from prior release | 20221014 |@Leok | lenV14ILL
#| GUI upgrade¹ from jammy with backports enabled | 20221014 |@Leok | dell_opt_7060
#| TUI upgrade² from jammy with backports enabled |20221014 |@Leok | dell_opt_7060
#| GUI upgrade¹ from LTS to next LTS release | na |
#| TUI upgrade² from LTS to next LTS release | na |
#| minimal install³ | not applicable
If required on Lubuntu 22.04 LTS with backports; refer https://lubuntu.me/jammy-backports-22-04-1/ for details on adding backports
¹`do-release-upgrade -d -m desktop -f DistUpgradeViewKDE`
²`do-release-upgrade -d`
³[Currently not implemented](https://phab.lubuntu.me/T58)
* The purpose of the "Optional box" field is to allow re-tests to be done on a different box to prior time (if possible)
* na is short for not-applicable
* focal or 20.04 doesn't have swapfile option so please ignore that field
To help understanding some of these testcases, the following link maybe helpful - https://discourse.lubuntu.me/t/testing-checklist-understanding-the-testcases/2743